Control And Programming; Control Panel; Keys (Functions); Display - Energie MONOBLOC 100esm Manual Tecnico

Technical Manual

5. CONTROL AND PROGRAMMING

5.1. Control Panel

The control panel of the Thermodynamic Solar system Eco is simple and intuitive. It enables the configu-
ration of several operating parameters according to the operating mode selected by the user.

5.2. Keys (Functions)

Key
ON/OFF Switch on and off controller;
Exit menu, submenu or cancel a function;
Unlock keyboard;
Enter menu;
Confirm parameters within menus or submenus;
Manual activation of the defrosting cycle (the defrosting function will only start if
the defined conditions to the beginning of the cycle are satisfied);
Pointer to increase values.
Select operation mode;
Pointer to decrease values.

5.3. Display

LED
Compressor's led;
•
•
•
Defrost cycle active
Ventilator's led;
•
•
•
Electrical resistance of functioning support
Maintenance led, verify compressor
Information on the display in Celsius degrees
Information on the display in Fahrenheit
Alarm indication led
ON/OFF equipment.
If the led is:
•
•
If the led is:
On, the compressor is functioning;
Blink, the compressor is temporizing to start.
If the led is:
On, the ventilator is functioning;
Blink, the ventilator is temporizing to start.
On means that the equipment is off.
Off means that the equipment is on.
Description
Description
MONOBLOC 100L
49