Kichler 39503 Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
3. Mounting surface should be clean, dry, flat and
1/4 in. larger than the canopy (A) on all sides.
Any gaps between the mounting surface and
canopy (A) exceeding 3/16 in. should be
corrected as required with silicone caulking
compound. Caulk completely around where the
back of canopy (A) meets the wall surface to
prevent water from seeping into outlet box.
4. Pass the canopy (A) over the long machine
screws (DD) protruding from the mounting
bracket (B) and secure in place with lock
washers (EE) and threaded knobs (CC).
Hardware Used
Threaded
CC
Knob
Lock
EE
Washer
5. Insert a 60-watt max. bulb (not included) into
socket (C).
Note: The fixture cage and shade will need to
be removed before installing bulb.
3
4
x 2
x 2
5
5
A
A
B
DD
F
EE
CC