Setting The Delay Time - Denon AVR-1306 Instrucciones De Operación

System Setup
4 CURSOR F F G G
Press the or button to select your
subwoofer setting, then press the
CURSOR H H
button to enter the settings and
switch to the Delay Time setting.
* S u b w o o f e r Y e s
Yes
• Select "Large" or "Small" not according to the actual size of
the speaker but according to the speaker's capacity for playing
low frequency (bass sound below the frequency set for the
Crossover Frequency) signals. If you are unsure, try comparing
the sound at both settings (setting the volume to a level low
enough so as not to damage the speakers) to determine the
proper setting.
2 Parameters
Large:
Select this when using speakers that have sufficient ability to
reproduce bass sound below the frequency set for the
crossover frequency mode.
Small:
Select this when using speakers that do not have sufficient
ability to reproduce bass sound below the frequency set for the
crossover frequency mode. When this is set, bass sound with
a frequency below the frequency set for the crossover
frequency mode is sent to the subwoofer.
None:
Select this when no speakers are installed.
Yes / No:
Select "Yes" when a subwoofer is installed, "No" when a
subwoofer is not installed.
If the subwoofer has sufficient low frequency playback
capacity, good sound can be achieved even when "Small" is
set for the front, center and surround speakers.

Setting the Delay Time

ENTER
or
Input the distance between the listening position and each
speaker to set the delay time for the surround playback.
Preparations:
Measure the distances between the listening position and the
speakers.
No
Subwoofer
1
Press the
distance from the front L speaker to the listening
position, then press the
button to switch to the front R speaker setting.
2
Press the
distance from the front R speaker to the listening
position, then press the
button to switch to the center speaker setting.
3
Press the
distance from the center speaker to the listening
position, then press the
button to switch to the surround L speakers
setting.
4
Press the
distance from the surround L speakers to the
listening position, then press the
CURSOR H H
speaker setting.
FL Center FR
Listening position
SL SR
CURSOR F F G G
or button to set the
ENTER CURSOR H H
or
* F r o n t L 3 . 6 m
CURSOR F F G G
or button to set the
CURSOR H H
ENTER
or
CURSOR F F G G
or button to set the
ENTER CURSOR H H
or
CURSOR F F G G
or button to set the
ENTER
or
button to switch to the surround R
12
ENGLISH
5
CURSOR F F G G
Press the or
distance from the surround R speakers to the
listening position, then press the
CURSOR H H
button to switch to the subwoofer
setting.
6
CURSOR F F G G
Press the or
distance from the subwoofer to the listening
ENTER
position, then press the
button to enter the setting and switch to the
Subwoofer Mode setting.
• The number changes in units of 0.1 meters each time one of
the buttons is pressed. Select the value closest to the
measured distance.
• The difference in distance for the various speaker settings
must not be greater than 6.0 meters.
ENGLISH
System Setup
button to set the
ENTER
or
button to set the
CURSOR H H
or