Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OR
Step 14
Insert the temperature gauge with bezel
through the mounting hole in the front of the
door. Place back plate and a hex nut onto
the temperature gauge stem from the inside
of the door panel and tighten it firmly.
Step 15
Place one end of the S-Hook around the
regulator neck or hose as shown.
Step 16
Using a set of pliers, crimp the S-hook
securely to the hose/regulator so that it can
not be removed from the assembly.
Step 17
When an LP tank is not attached to the
smoker, use the S-Hook to hang the
hose/regulator from the carry handle on the
side of the smoker. This will help prevent dirt
and other particles from plugging the end of
the assembly.
11
Capítulos
Tabla de contenido
