Intended Use; Extension Cord; Commissioning; Connecting The Mobile Dust Extractor - Festool CT MINI I HEPA Manual De Instrucciones Original

6

Intended use

The dust extractor is designed for use as speci­
fied for the aspiration and evacuation of non-
noxious dusts, dirt, sand, shavings etc..
The dust extractor is designed as specified for
vacuuming water.
The dust extractor is designed for household,
commercial or both use.
The mobile dust extractor is only suitable for
indoor use.
This extractor has been tested in accordance
with OSHA 1926.1153. The HEPA Filter is tested
and certified in accordance with IEST RP-
CC-001, to filter and exhaust air particles to 0.3
microns with at least 99.97 % efficiency with no
bypass leakage.
WARNING
The user will be liable for damage due to im­
proper use.
7

Commissioning

WARNING
Unauthorised voltage or frequency!
Risk of accidents
► Observe the specifications on the ma­
chine's name plate.
► Observe country-specific regulations.
7.1 Initial commissioning
► Insert the filter/disposal bag [2].
► Fit the cord holder [3].
► Connect the suction hose [3].
2
3
7.2

Extension Cord

If an extension cord is required, it must have
sufficient cross-section to prevent an excessive
drop in voltage or overheating. An excessive
drop in voltage reduces the output and can lead
to failure of the motor. The table below shows
you the correct cord diameter as a function of
the cord length for this tool.
Total Extension 25 50
Cord Lenght
(feet)
Cable size (AWG) 14 12 not recommended
Use only U.L. and CSA listed extension cords.
Never use two extension cords together. In­
stead, use one long one.
The lower the AWG number, the stronger
the cord.
7.3

Connecting the mobile dust extractor

WARNING
Risk of injury from uncontrolled tool start-
up
► Before switching on ensure that the con­
nected tool is switched off.
WARNING
Risk of injury from electric current
► Insert the mains plug into an earthed sock­
et.
► Do not reach into the electrical outlet mod­
ule on the mobile dust extractor.
While the mobile dust extractor is con­
nected to the mains socket, an electric
current is running through electrical outlet
module on the mobile dust extractor at all
times.
English
100 150
11