Adjusting The Door Opening Angle - Thermador T18 Serie Instrucciones De Instalación

3. Cut the cover strips on the short sides to the
required length.
4. Slide cover strips in the gap between the door
panel (a) and glass pane (b).
34

Adjusting the door opening angle

Depending on the installation situation, it may be
necessary to adjust the door opening angle. A door
opening angle of 115° has been set at the factory.
To adjust the door opening angle to 90°:
1. Open door to 90°.
2. Insert the banking pin through the boreholes which
are now vertically aligned and drive in with
a hammer.