General Specifications - Klein Tools CL2300 Manual De Instrucciones

Ocultar thumbs

Contenido

página de 25

/ 25
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

ENGLISH

The Klein Tools CL2300 is a True RMS, auto-ranging clamp meter. It

measures AC / DC voltage, AC / DC current, resistance, capacitance,

frequency, duty cycle, and temperature. It can also test non-contact

voltage, diodes, and continuity.

•

Operating Altitude:

•

Humidity:

80% max

•

Operating Temperature:

•

Storage Temperature:

•

Accuracy Temperature:

•

Temperature Coefﬁ cient:

•

Dimensions:

•

11.9oz.

Weight:

•

Calibration:

•

CAT Rating:

•

± (% of reading + # of least signiﬁ cant digits)

Accuracy:

To ensure safe operation and service of the tester, follow these instructions.

Failure to observe these warnings can result in severe injury or death.

• Before each use, verify meter operation by measuring

a known voltage or current.

• Never use the meter on a circuit with voltages that exceed the

category based rating of this meter.

• Do not use the meter during electrical storms, or in wet weather.

• Do not use the meter or test leads if they appear to be damaged.

• Ensure meter leads are fully seated, and keep ﬁ ngers away from

the metal probe contacts when making measurements.

• Do not open the meter to replace batteries while the probes

are connected.

• Use caution when working with voltages above 60V DC,

or 25V AC RMS. Such voltages pose a shock hazard.

• To avoid false readings that can lead to electrical shock,

replace batteries if a low battery indicator appears.

• Unless measuring voltage or current, shut off and lock out

power before measuring resistance or capacitance.

• Always adhere to local and national safety codes. Use individual

protective equipment to prevent shock and arc blast injury where

hazardous live conductors are exposed.

AC Alternating Current

DC Direct Current

DC/AC Voltage or Current

Ground

AC Source

CL2300

Instruction Manual