Tools And Materials; Before You Begin - Kohler K-7213 Guia De Instalacion

Ocultar thumbs Ver también para K-7213:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Tools and Materials

Adjustable
Plumbers
Wrench
Putty
Caulk
Gun
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

CAUTION: Risk of product damage. Do not kink or cause
damage to the cable during installation.
IMPORTANT! This product is recommended for baths 17" (43.2 cm)
to 22" (55.9 cm) deep from the center of the bath overflow outlet to
the center of the bath drain outlet.
IMPORTANT! Do not wrench tighten the connections and fittings
until instructed to do so. Initially hand tighten the connections.
Observe all local plumbing and building codes.
Turn off the main water supplies.
Refer to the roughing-in dimensions of your bath to properly
install this product.
Carefully inspect the fittings for damage before installing.
If you are installing a new bath, install the drain before installing
the bath.
1054250-2-A
Plus:
• PVC Cement and Primer
Hex Wrench
(supplied)
Tube Cutter
Silicone
Sealant
2
Tape
Measure
Kohler Co.
Tabla de contenido
loading

Este manual también es adecuado para:

K-7214

Tabla de contenido