Pleasant Hearth OFW191S Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
2. Attach air vents (D) to the inside bottom of the
fire bowl (E) using six M6 bolts (AA) as illus-
trated.
Hardware Used
M6x10mm Bolt
AA
3. Place table (F) upside down on a smooth,
clean surface. Attach one leg ASM (H) to the
table (F) using M6 bolts (AA).
Repeat with remaining legs.
DO NOT tighten until Step 4 is completed.
Hardware Used
M6x10mm Bolt
AA
4. Attach side panels (G) to legs (H) by inserting
M6 bolts (AA) through predrilled holes in side
panels (G) and legs (H) as illustrated. Tighten all
bolts (including parts from step 3) with
a screwdriver.
Hardware Used
M6x10mm Bolt
AA
2
E
x 6
AA
3
H
x 8
F
4
x 16
5
D
AA
AA
H
G