Technical Characteristics; Installation; Receiving And Unpacking; Electric Installation - Skymsen SI-315HD Manual De Instrucciones

1.3 Technical Characteristics

CHARACTERISTICS
Voltage
Electric Current
Frequency
Power Rating
Consumption
Height
Net Weight
Shipping Weight
Maximum Cutting Height
Maximum Cutting Width

2. INSTALLATION

2.1 Receiving and Unpacking

As soon as the equipment is received check the packaging integrity. If packaging is
damaged, check if there has been some damage to the equipment during transportation.
If damage has been found, keep the packaging and contact immediately the transporter.
2.2 Installation
2.2.1 Placing the saw
The Saws must be installed over a firm working surface. See below drawing the
recommended area.

2.2.2 Electric Installation

The equipment has been designed to operate 230 Volts. When you receive the equipment
check the voltage indicated on the cord label.
The power plug has 3 pins the middle pin is the ground. All the 3 pins must be properly
connected.
Width
Depth
1350 mm
TABLE 01
UNIT
V
A
Hz
HP
kW.h
in
in
in
lb
lb
in
in
1350 mm
FRONT SIDE
SI-315HD
230
14,7
60
3
2.2
72 3/4
37 1/2
37 1/2
265
408
14 1/8
12 1/4
7