Skymsen SI-315HD Manual De Instrucciones página 20

PROBLEM
The saw does not switch on.
Smoke or burn smell.
Machine switch on but when
product touches blade # 08
(Pic. 01) it stops or runs slowly.
Unusual noises.
The blade frequently tears.
Difficulty to cut the product.
20
TABLE 02
CAUSES
- The saw is unplugged;
- Thermal Protector is activated;
- Lack of power;
- Problem with the internal or
external circuits of the Saw.
Problem with the internal or
external electric circuits of the
Saw.
- Belt slipping on pulleys;
- Damaged capacitor.
- Blade slipping on wheels;
- The blade incorrectly welded.
- Blade or wheels dirty;
- Faulty wheels.
- Blade or wheels dirty;
- Wrong tension on the blade;
- Blade is off the wheels center;
- Blade blunt.
SOLUTIONS
- Plug it;
- Wait a few minutes and reset
the Thermal Protector;
- Check if there is electric
power;
- Call Technical Assistance.
Call Technical Assistance.
- Call Technical Assistance;
- Call Technical Assistance.
- Turn the blade tension
regulator handle # 01 (Pic. 01)
to increase pressure between
blade and wheels;
- Change the blade.
- Clean the saw. (See item 3.3);
- Change the wheels.
- Clean the saw. (See item 3.3);
- Regulate blade tension, (See
item 2.2.3);
- Call Technical Assistance;
- Change the blade.