Skymsen SI-315HD Manual De Instrucciones página 12

- Fixed Table Block
Remove the Fixed Table Block lifting the block above the Fixed Table, see picture 05.
- Fixed Table
Lift vertically the Fixed Table front side, picture 06 (see the arrow) until to loose the lower
trigger.Then pull the Fixed Table towards the front, picture 07, (see the arrow) until the
table is completely removed.
PICTURE 06
- Blade
Turn the Blade Tension Regulator Handle # 01 (Pic.01) counter clockwise, until the blade
gets loose, for removing.
- Upper wheel
Remove the blade, after, hold strongly the Upper Wheel #.05 (Pic.01), push it vertically up
and then pull it towards the saw front side.
- Lower Wheel
Remove the Staple #.01 (Pic.08) hold strongly the Lower Wheel and pull it towards the saw
front side, picture 09.
12
PICTURE 05
IMPORTANT
Use steel gloves to hold the blade
PICTURE 07