Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MX SERIES COMMERCIAL MIXING VALVES
SPECIFICATIONS
A
A
C
Fig. 1. Dimensions.
Product
Size
Number
Flange
MX131LF
2-1/2 in.
MX132LF
3 in.
MX 050-RP Recirculation Adapter Kit
Recirculation adapter size:
(MX131LF 1 in. and MX132LF 1-1/4 in.)
Maximum Temperature: 221° F (105° C)
Maximum working pressure: 150 psi (1034 kPa).
Service
To remove dirt, flush valve. To remove calcium and lime
deposits, soak valve in vinegar for 24 hours and flush or
contact factory for assistance. Do not attempt to field repair
this calibrated valve.
Temperature Selection
The MX Series Valves is calibrated: 113°-149° F (45°-65° C).
The factory setting is 130° F (54° C). Change temperature
setting with an Allen wrench, which is included. Punch
through the center of the temperature range label. By turning
the screw clockwise, the mix temperature increases
(counterclockwise, it decreases). Each complete turn with the
Allen wrench changes the temperature by 3.6° F (2° C). Do
not operate valve at temperatures outside of its calibrated
range of 113°-149° F (45°-65°). Use a thermometer to verify
temperature.
38-00034EFS—03
D MINIMUM
SIZE
MX131LF - 132LF
B
M36174
Table 1. MX Series Valve Models.
Min. Flow
GPM @
C
(GPM)
30 psi Temp. Range
v
34.0
8
186
50.0
12
274
Installation Note
The flanges are threaded 5/8 - 11 UNC. Supplied with the
valve are 12 D washers and 12 back-up nuts. You must
install the D washers and back-up nuts (torqued as
necessary) to assure leak-tight, secure system.
Weight in
Lbs (kg)
113°-149° F
51 (23.1)
(45°-65° C)
113°-149° F
62 (28.1)
(45°-65° C)
0.2 (0.1)
Maximum working Pressure 150 psi (1034 kPa).
Minimum temperature difference between hot and mix
should be 10° F (6° C).
2
Dimensions in inches (mm)
A
B
5.7 (144.8) 5.7 (144.8) 11.4 (289.6) 4.0 (101.6)
6.1 (154.9) 6.1 (154.9) 12.2 (309.9) 4.0 (101.6)
130
113
149
˚F
54
65
45
˚C
M36225
Fig. 2. Temperature range label.
C
D
Tabla de contenido
