Install The Top Bracket; Install Trim Kit Frame; Replace Any Loose Items; Instalación Del Soporte Superior - KENMORE ELITE 22009 Instrucciones De Instalación

Install The Top Bracket

1. Place the top bracket on the top of the microwave oven,
with the tabs on the top and sides of the bracket fitting
squarely against the microwave oven.
Screws
2. Drill pilot holes through the holes in the top bracket.
Attach the top bracket to the cabinet using nine round-
head screws

Install Trim Kit Frame

1. Place the trim kit frame over the front surface of the
microwave oven.
2. Open the microwave oven door. Secure the trim kit frame
to the top and bottom brackets using four flat-head screws
(two on the inside top and two on the inside bottom).
Flat-head screws

Replace Any Loose Items

1. Your trim kit is now fully installed. Replace any loose items
that were removed from the inside of the microwave oven.
Save or discard the extra screws.
Do not place them in the microwave oven.
2. Keep these installation instructions for future reference.
3. Reconnect power at fuse box or circuit breaker panel to the
receptacle into which the microwave oven is plugged.
EN-6
Flat-head screws