Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Pick a location which will allow you to blow the cold
air into the area you want.. Windows used for
installation must be strong enough to support the
weight of the air conditioner. Good installation with
special attention to the proper position of the unit
will lessen the chance that service wilt be needed.
When cooling more than one room, installation
locationis very important, To cool your rooms, cold
air must be blown from the air conditioner in a
straight path.
HOW TO INSTALL
tf the air conditioner is blocked by a storm window frame,
see step 19 on page 8 before beginning to install
D
Remove the screws which fasten the cabinet at
both sides and at the back. Save side screws.
Discard back screws.
FIG. 3
_
Slide the unit out of the cabinet by gripping the
base pan handle and pull forward while bracing the
cabinet.
FIG. 4
_Cut
the FOAM SEAL (ITEM l) to fit the
underside
of the window sash. Peel off the backing
and attach the FOAM SEAL as shown in Fig 5,
FIG. 5
_
Insert the side curtain (iTEM A) into the upper
guide and lower guide of the air conditioner,, Fasten
the curtains to the unit with screws (ITEM E)
Upper guide
ITEM E
L
_Open
the window
Mart{ a line on center of the
window inner sill.
Carefully
place the cabinet on the window inner sill
and align the center of the cabinet front with the
center tine marked in the window inner silt.
:
_Window
sill
FIG. 7
_Pull
the bottom window sash down behind the
upper guide until they meet.
NOTE: Do not pull the window sash down so tightly
that the movement
of side curtain is restricted,,
Window sash
Upper guide
Foam
seal"
Side curtain
_
Loosety assemble the sill supports using the
parts in FIG. 9.
,.ooo,
o. oo
"_
ITEM g
f/-
'_--u
'" _TEMD
ITEM C
FIG. 9
Capítulos
Tabla de contenido
