Air Filter Cleaning; Howto Remove The Front Grille - Kenmore 580.72089 Manual Del Propietário

AiR FILTER CLEANING
The Air Filter will become dirty as it removes dust
irom the inside air tt should be washed at least
every 2 weeks tf the Air Fiiter remains full of dust,
the air flow wi!t decrease and the cooling capacity
wifl be reduced, possibly damaging the uniL
,, Pull the inlet grille forward, grasping both tabs,
then pull out the air filter (FIG, 28)
o Wash the Air Filter under the faucet with warm
water Be sure to shake off aIi the water before
replacing the filter (FIG 29)
,I FIG. 28 FiG. 29
AiR PURiFYiNG FILTER CLEANING
//_ CAUTION: To avoid possible minor electric
shock, do not touch Air Purifying Filter within
10 seconds after opening inter grille,
The Air Purifying filter behind the air filter should be
checked and cleaned once every 3 months or more often
if necessary
,, After removing the air filter, pull Air Purifying filter
slightty fop._ard to remove
• Dip the Air Purifying fitter into water mixed with neutral
detergent for 20_.30 minutes
o The Air Purifying Filter must be completely dry before
reinstalling it into the Air Conditioner
,, Re-install the Air Purifying filter to the original position
: ": ';,:3 "
AnR CONDUT ONER CLEANnNG
Clean the front grille and inlet grille by wiping with a
cloth dampened in a mild detergent solution
The cabinet may be washed with mild soap or
detergent and lukewarm water, then polished with
liquid appliance wax
-13-
To ensure continued peak efficiency, the condenser
coils (outdoor side at the unit) should be checked
periodically and cleaned if they become clogged
with soot or dirt from the atmosphere. Brush or
vacuum exterior coils to remove debris from fins.
FIG. 31
HOWTO REMOVE THE FRONT GRILLE
• Open the inlet grille downward,
o Remove the screw securing the Front Grille
• Push the grille up from the bottom and pull the top
of the griile away from the case to lift the top tabs
out of their slots.
HOW TO REPLACE THE
FRONT GRILLE
Attach the front grilie to the cabinet by inserting the
tabs on the grille into the slots on the front of the
cabinet. Push the grille in until it snaps into place.
FIG, 33