Aqua Medic power flotor S.3 Manual De Instrucciones página 7

Problem: The ratio between supplied air and the water volume is not correct.
Cause: Possibly, the air injection nozzle is clogged or the pump head resp. needle wheel is dirty.
Action: Dismantle the venturi pump, clean the needle wheel and pump thoroughly, carefully clean the
air injection nozzle with a thin brush or blunt instrument and re-assemble the pump again.
Problem: The skimmer skims off too heavily. The foam cup is filled too fast.
Cause: The water level in the filter sump is not optimal, water flow is too quick.
Action: Adjust water level or decrease the pump power.
8. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear i.e: impellers or
drive wheels etc. The original invoice or receipt is required as proof of purchase. During the warranty period, we
will repair the product for free by installing new or renewed parts. This warranty only covers material and
processing faults that occur when used as intended. It does not apply to damage caused by transport, improper
handling, incorrect installation, negligence, interference or repairs made by unauthorized persons. In case of a
fault with the unit during or after the warranty period, please contact your dealer. All further steps are
clarified between the dealer and AB Aqua Medic. All complaints and returns that are not sent to us
via specialist dealers cannot be processed. AB Aqua Medic is not liable for consequential damages resulting
from the use of any of our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 03/2021/v4
7