Valve Setting - Nibe HPAC 42 Instrucciones De Instalación Y Mantenimiento

3V
NORDICOLD
Should the valve motors become loose and the valves
misaligned, adjust the position of the valves using, e.g.
an adjustable spanner to get the right valve setting.
During assembly with the motors disconnected and
the window on the valves showing black, the spindles
should be turned according to Active cooling below.
When voltage fed rotate the valves 180 °.
Heating
Passive cool-
ing
Active cool-
ing
Shuttle valves

Valve setting

MODULO
The centre punch mark indicates in which position the valve should be set
(points towards the open port).
HPAC 42
19