Electrical Connections; General; Description Of Functions / Connection To Fighter 1330 - Nibe HPAC 42 Instrucciones De Instalación Y Mantenimiento

• Connection of HPAC should be done under the
supervision of a qualified electrician.
• The front cover is removed by pulling out the lower
edge and then lifting it up.
• The internal covers are opened by loosening the
screws at the edges and by the electrical connec-
tion.
• Check that the valves are set in the required posi-
tion. See section Shuttle valves > Valve inspec-
Till FIGHTER 1330
To FIGHTER 1330

Description of functions / Connection to FIGHTER 1330

For a description of functions and connecting a HPAC
to FIGHTER 1330, see FIGHTER 1330 Installation
and Maintenance Instructions section Description of
Functions — Basic Functions > HPAC.
Electrical connection

General

PCX
ACX
230 V
PE
HPAC 42
NOTE!
Electrical installation and service
must be carried out under the supervi-
sion of a qualified electrician. Electri-
cal installation and wiring must be
carried out in accordance with the
stipulations in force.
17
AJ