Hot Water; Programmable Functions - Breville the Oracle Manual De Instrucciones

HOT WATER

The HOT WATER button can be used to pre-
heat cups or add hot water manually.
To stop and start the pour of hot water, press
the HOT WATER button.
To ensure water is dispensed at the correct
temperature, hot water will cease to dispense
after approx. 90 seconds. Depending on the
size of your cup, you may need to press the
HOT WATER button a second time.
HOT WATER
NOTE
You cannot run hot water and extract espresso
at the same time.

PROGRAMMABLE FUNCTIONS

To enter program mode, press the
MENU button. Rotate SELECT dial to the
desired function.
Program mode allows you to program:
• Shot Volume
• Shot Temperature
• Clean Cycle
• Set Clock
• Auto Start
• Auto Off
• Tamp Set
• Pre-Infusion
• Americano Adjust
18
To exit program mode, press MENU button.
NOTE
The MENU button is disabled when the
machine is in coffee making mode or
dispensing hot water.
PROGRAMMING SHOT
VOLUME/DURATION
Fill the portafilter using the auto grind, dose
& tamp function. Insert the portafilter into the
group head.
While 'SHOT VOL' is displayed on the LCD,
rotate the SELECT dial to '1 CUP' to reprogram
the 1 CUP button, or '2 CUP' to reprogram the
2 CUP button. Press the SELECT dial to start
espresso extraction. When required espresso
volume/duration has been extracted, press
SELECT dial to stop extraction. Machine will
beep once to confirm the new volume/duration.
MENU
EXIT