RCA DRC96100 Manual Del Usuario página 5

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Connections
A. Connecting a TV
If your TV has audio/video inputs, you can connect the unit to your TV
using standard Audio/Video cables.
White Red Yellow
To AUDIO /
VIDEO OUT
Audio / Video cable
jacks
(not included)
Watching a DVD on your TV
1. Turn on the unit.
2. Turn on the TV and follow the instructions included with it to watch
video from external sources.
3. To mute the unit and listen the sound from TV only, please press
button until
appear on the screen.
B. using Headphones/Earphones
• Turn down the volume before connecting, and then adjust the level.
• When headphones/earphones are connected, no sound will be
emitted from the unit's speaker.
Caution:
Avoid listening to sound
at levels which may be
harmful to your ears.
Playing a Disc (Basic Playback)
This owner's manual explains the basic instructions for operating
this unit. Some DVDs are produced in a manner that allows specific
or limited operation during playback. Therefore, this unit may not
respond to all operating commands. THIS IS NOT A DEFECT. Please
refer to the instructions accompanying the specific DVD in question
for more information about the options available on that DVD.
"
" may appear on the screen during operation. A "
desired operation is not permitted by the unit or disc.
Playing a Disc
/ STANDBY / ON switch on the left side of the unit to
1. Slide the
the ON position.
See Customizing the function settings before proceeding to step 2.
2. use your fingers to hold the disc door on the front of the unit and
lift it up to open.
3. Hold the disc by its sides and carefully place it onto the spindle with
the label side facing up, pushing gently until you hear a "click".
4. Close the disc door. It takes a short while for your unit to load the
disc. After loading, the unit will automatically bring you to the main
menu of the DVD or start playing the DVD.
5. If the unit does not automatically start playing the DVD, press the
button on the unit.
Pausing Playback (Still Mode)
Press the
button. To resume normal playback, press the
again.
Stopping Playback
Press the
button at the location where you want to interrupt
playback. To resume playback at the position where the disc was
stopped, press the
button.
If you press the
button twice, the unit's memory will be cleared and
pressing the
button will reset the DVD to the beginning.
TV
Headphones/Earphones
(3.5mm diameter plug)
(not included)
" means the
button
Playing a Disc (Basic Playback)
Fast Forward / Fast Reverse
1. Press and hold the
or
time you press and hold the
changes in the following sequence:
2. Press the
button twice when you reach the desired point to
resume normal playback.
Notes:
• The DVD player mutes sound and subtitles during reverse and
forward scan of DVDs.
• The fast playback speed may differ depending on the disc.
Skip (Forward / Reverse)
• Press the
button to advance titles, chapters/tracks.
• Press the
button to go back to current or previous titles,
chapters/tracks.
Viewing JPEG Files
This unit can play JPEG files recorded on a CD-R or CD-ROM disc (CD-RW
is not recommended).
Viewing JPEG Files
1. use your fingers to hold the disc
door on the front of the unit and
lift it up to open.
2. Hold a JPEG file disc by its edges
and gently push it onto the
spindle with the label side facing
up until you hear a "click".
3. Close the disc door. The JPEG
files on the disc will be displayed one by one automatically. If the
disc does not play automatically, press the
4. Press the MENU or
button to display a folder list. Press the
button to highlight a JPEG file to play. Press the
playback.
Notes:
• You can press the
button to freeze the picture. Press the
again to resume picture slide show.
• You can press the button to quit playback.
• You can press the
or
• Some discs may not permit this operation.
button when a disc is playing. Each
or
button, the playback speed
button.
button to start
button to change the picture.
EN
or
button
5
Tabla de contenido
loading

Tabla de contenido