KTM Power Parts 75612945000 Instrucciones Para El Montaje página 7

1
2
2
2
5
4
3
B
7
6
- Remove the tank.
- Loosen the screw (1).
- Detach the fuel hose on the left and right (A).
- Carefully raise the tank and disconnect the plug-in connection of the fuel
pump and fuel sensor.
- Set the tank to the side.
A
- Remove the screws (2) and set the box to the side.
- Detach the hose (3), remove it (Figure A) and mount it in the air filter bra-
cket (4) (included).
NOTE:
Slide the hose through the air filter bracket (direction of arrow) and let it
engage by pulling on it gently (Figures B + C).
3
- Detach hose (5) and replace it with hose (3).
A
- Mount the box again using the screws (2).
C
- Detach the hose (6) from the SLS valve (7).
- Close off the hose with a dummy plug (included) and secure it with a clamp.
7