General Information; Address Of The Manufacturer; Use And Conservation Of These; Symbols And Terms - EMAK PW 120C Manual De Istrucciones

1 G I
ENERAL NFORMATION
Congratulations for choosing one of our products. We would like to remind you that we took the safety of the
operator, the effi ciency of its use and the protection of the environment into great consideration when designing
and manufacturing this product.
In order to preserve its features over time, please read and follow these instructions carefully.
Particular attention must be awarded to the parts with the following symbol:
as they contain important instructions regarding safety when using the water cleaner.
The Manufacturer is not liable for damage caused by:
• failure to comply with these instructions;
• use of the water cleaner not included in the " INTENDED USE " section;
• failure to comply with current safety regulations and regulations for the prevention of accidents in the
workplace;
• incorrect installation;
• failure to carry out the prescribed maintenance;
• modifi cations or actions without the authorisation by the Manufacturer;
• use of non-original or unsuitable spare parts for this model of water cleaner;
• repairs which were not carried out by a Skilled Technician.
1.1 A
DDRESS OF THE
The address of the manufacturer is given in the declaration of conformity at the end of this part of the instruction
manual.
1.2 U A C
SE ND ONSERVATION OF THESE
The operating and maintenance instructions are an integral part of the water cleaner and they must be kept in a
safe place for future reference so that they may be readily consulted in case of need.
The operating and maintenance instructions contain important information for the safety of the operator and of
any people near him and for the protection of the environment.
In case of deterioration or loss, a new copy should be requested from the dealer or from an authorised service
centre.
If the water cleaner is passed on to a third party, please make sure these operating and maintenance instructions
are also given to the new owner.
We take great care when drawing up our instructions. If you note any mistakes, please do inform the Manufacturer
or an authorised service centre.
The Manufacturer reserves the right to modify, update and correct these instructions without notice.
It is illegal to copy these instructions, even partially, without prior authorisation by the Manufacturer.
1.3 S T
YMBOLS AND
1.3.1 Symbols
The symbol:
WARNING
next to certain parts of the text, is to indicate that there is the fi rm possibility of injury to persons if the relative
instructions and indications are not followed.
The symbol:
CAUTION
next to certain parts of the text is to indicate that there is the possibility of damaging the water cleaner if the
relative instructions are not followed.
1.3.2 Terms
• Skilled Technician: a person, generally from the service centre, who has received appropriate training and is
authorised to carry out special maintenance and repairs on the water cleaner. Any work on is electrical parts
must be carried out by a Skilled Technician who is also a Qualifi ed Eletrician, i.e. a person with professional
18
M
ANUFACTURER
ERMS
WARNING
O M
PERATING AND
M
AINTENANCE ANUAL