Tabla de contenido
Idiomas disponibles
Idiomas disponibles
I/O Receiver setting and installation
Comparison table between binary system and decimal system
Connecting port
I/O receiver specification
Input voltage
Maximum input current
Communication system
Frequency band
Transmission range
External connector
Operating temperature range
Weight
Note : The transmission distance varies depending on the operating environment. Metal
walls or metal-containing walls will reduce the transmission distance.
1English1
Set the Group and ID of the control box to
the same as the tool. The dip switch of the
control box is an eight-digit binary
sequence, the On direction is 1, and the
other is 0. The first four codes are Group,
the last four codes are ID, as shown here
are 0101 and 0110, after looking up the
table, it can be known as Group 5, ID 6
Clip
Wire connect hole
+ 24VDC ± 20%
40mA (input voltage 24VDC)
Wireless
2.4GHz
10m (Note 1)
24VDC power jack * 1
8 pos wire terminal block
0 ~ 40
255g
English
-15
Port definition
1: 24V
2: Fasten OK
3: Tool protection
4: Fasten NG
8: 0V
Tabla de contenido
