Safety Instructions; Standards & Regulations - VWR 444-7084 Manual De Instrucciones

S I
AFETY NSTRUCTIONS
Please read the entire instruction manual before operating the
Incubating Orbital Shaker.
WARNING! DO NOT use the Incubating Orbital Shaker in a
hazardous atmosphere or with hazardous materials for which
the unit was not designed. Also, the user should be aware that
the protection provided by the equipment may be impaired if
used with accessories not provided or recommended by the
manufacturer, or used in a manner not specified by the
manufacturer.
Always operate unit on a level surface for best performance
and maximum safety.
DO NOT lift unit by the tray or lid.
CAUTION! To avoid electrical shock, completely cut off power
to the unit by disconnecting the power cord from the unit or
unplug from the wall outlet. Disconnect unit from the power
supply prior to maintenance and servicing.
Spills should be removed promptly. DO NOT immerse the unit
for cleaning.
DO NOT operate the unit if it shows signs of electrical or
mechanical damage.
Earth Ground - Protective Conductor Terminal
Alternating Current
3
S & R
TANDARDS EGULATIONS
VWR International hereby declares under it's sole responsibility that
the construction of this product conforms in accordance with the
following standards:
Safety standards:
IEC 61010-1 Safety requirements for electrical equipment for
measurement, control and laboratory use. Part I:
General Requirements.
IEC 61010-2-010 Part II: Particular requirements for laboratory
equipment for the heating of materials.
IEC 61010-2-051 Part II: Particular requirements for laboratory
equipment for mixing and stirring.
UL Std. No. 61010-1
CSA/CAN C22.2 No. 0-M91
CSA/CAN C22.2 No. 61010-1-04
EMC standards:
FCC-B EN45501
EN55022-A EN6100-3-3/3-3
EN61000-4-2 EN61000-4-3
EN61000-4-4 EN61000-4-5
EN61000-4-6 EN61000-4-11
Associated EU guidelines:
EMC directive 89/336/EEC
LVD directive 73/23/EEC
Patent Pending