THERMEx FJERNBETJENING Instrucciones De Uso página 58

58 THERMEX FJERNBETJENING
Press the light button until the decoration light changes to the desired colour. The sequence of
colours is as follows:
• White
• Blue
• Green
• Colour change
• Off
Once the desired colour is selected, confirm it by pressing the off button on the remote control.
The decoration light is turned off in the same way as it is activated. Keep the light button pres-
sed until the decoration light turns off and confirm the selection by pressing the off button on
the remote control.
AFTER-RUNNING FUNCTION
After-running means that the motor will stop automatically 5, 10, 15 or 20 minutes after this
function has been activated. After-running runs at the speed that the hood is set to when the
'after-running' function is selected.
Press the after-running button to activate after-running. This function can only be activated
when the motor is running. The operating time for after-running is adjusted by pressing the +
and - buttons. 1 on the display means that the hood will run for 5 minutes, 2 means that it will
run for 10 minutes, etc. The LED on the display will flash when the after-running function has
been selected.
Pressing the after-running button while the function is active turns after-running off. After-
running also turns off if the remote control is turned off completely.
PERIODIC EXTRACTION
Periodic extraction means that the hood starts once every hour at level 1 for 5, 10, 15 or 20 mi-
nutes in order to change the air in the kitchen.
Periodic extraction is switched on by pressing the periodic extraction button. This can be done
regardless of whether the motor is running or the light is on. The LED on the display will flash
when the after-running function has been selected.
B R520192162008032018