Adjust The Print Alignment And Color Density (Pc) - Rimage Everest III Printer Guia Del Usuario

Rimage Everest™ III and 600 User Guide

Adjust the Print Alignment and Color Density (PC)

1. Access printing preferences. Refer to page 17 for instructions.
2. Select the Utility tab.
3. Select Status Monitor... button. The Status Monitor window opens with the Status tab active.
Tip: On the Status tab, you can view the progress of a print job, the type of print ribbon installed, and the estimated
percentages of unused ribbon for the print and retransfer ribbons.
4. Select the Printer Information tab to view or change the Print Alignment or Color Density settings.
Tip: The Printer Information tab also displays the current firmware version and serial number of your Everest printer.
a. View or change the Print Alignment Settings.
From the Print Alignment Settings pane, select the Modify button. The Print Alignment Settings window opens.
i.
ii. Select the desired Color/Monochrome setting in the Horizontal Alignment Settings pane to modify the horizontal
alignment for all ribbon types.
iii. Select the desired Color setting to modify the vertical alignment for prints with a CMY or CMY+W ribbon.
iv. Select the desired Monochrome setting to modify the vertical alignment for prints with a monochrome ribbon.
v. Select OK to save the changes. The Print Alignment Settings window closes.
b. View or change the Color Density Settings.
i. From the Color Density Settings pane, select the Modify button. The Color Density Settings window displays.
ii. Select the desired Cyan, Magenta and Yellow settings to modify the color density.
iii. Select the desired Black setting to modify the density for monochrome images.
iv. Select OK to save your changes. The Color Density Settings window closes.
5. Select Close to close the Status Monitor dialog box.
6. Select OK to close the Rimage Everest Printing Preferences window.
20 2000621_B