ANSMANN POWERBANK 5.4 Manual Del Usuario página 6

product. There is a risk of injury!
ƒ ƒ
This product is not to be used by persons (including children)
who have restricted physical, sensory or mental capabilities or
who do not have adequate experience and knowledge in handling
this product. Such persons must be instructed beforehand by a
supervisory person who is responsible for their safety or must be
supervised during the use of the device!
ƒ ƒ
Failure to observe the safety instructions can result in dangerous
injuries to persons or damage to the POWERBANK or the connec-
ted devices!
ƒ ƒ
If you have questions, please contact your local dealer or our
service department.
USE
> CAPACITY DISPLAY
Press the power button to check the energy remaining.
ƒ ƒ
4 LEDs illuminate:
ƒ ƒ
3 LEDs illuminate:
ƒ ƒ
2 LEDs illuminate:
ƒ ƒ
1 LED illuminates:
ƒ ƒ
No LED illuminates: The POWERBANK is completely discharged.
Please charge the POWERBANK immediately. If the POWERBANK
will be unused for an extended period of time, it is necessary to
charge it before storage in order to avoid the rechargeable bat-
tery being damaged due to deep discharge.
> CHARGING THE POWERBANK
MICRO USB
Insert the Micro-USB plug of the USB cable into the Micro-USB socket
on the POWERBANK and the USB plug into the USB port on a computer
or a USB charger.
TYP-C
Stecken Insert the type-C plug of the USB cable into the type-C socket
on the POWERBANK and the USB plug into the USB port on a computer
or a USB charger.
The charge process starts automatically. During the charge process,
Deutsch |
75% - 100%
50% - 75%
25% - 50%
01% - 25%
English | Français | Español | Português
Italiano | Nederlands