Technical Data - ANSMANN POWERBANK 5.4 Manual Del Usuario

up to 4 flashing LEDs indicate the status of the charge progress. After
the charge process is complete, all 4 LEDs illuminate steadily.
> CHARGING DEVICES
In order to charge a device, such as a smartphone for example, please
use the USB cable supplied (provided that the Micro-USB plug fits your
mobile device) or the original charge cable for your device. The Power-
bank likewise has a type-C output. Please use a suitable type-C cable
for this. Insert the USB plug of the cable into the POWERBANK and the
other end into your device. The charge process starts automatically.
Simultaneous charging of multiple end-devices is possible with res-
trictions. This depends on the total charge current required.
The POWERBANK switches off automatically after the charging is com-
plete. Please disconnect your device from the POWERBANK once the
charge process is complete. Please note that the Powerbank cannot
be charged and discharged simultaneously.
The POWERBANK may heat up a little depending on the charge/
discharge current.
> LED lamp
The Powerbank has an LED lamp. Press the power button 2x in quick
succession ("double-click") to activate or deactivate the LED lamp.

TECHNICAL DATA

1. Rechargeable battery type:
2. Capacity / Energy:
3. Input:
4. Outputs:
5. Accessories:
6. Operating temperature: 0°C to +25°C
7. Charge time:
3.7V Lithium-Ion
(2 x 18650 round cells)
5,000mAh / 18.5Wh
Micro-USB 5V DC | max. 2000mA
Type C 5V DC | max. 2100mA
2x 5V DC | max. 3000mA
(both outputs active simultaneously)
Output 1 (USB): 5V DC | max. 3000mA
Output 2 (type C): 5V DC | max. 3000mA
Charge cable (USB to Micro-USB)
ca. 5 hours (depending on the
charger used)