If The Audio Is Not Output - Kenwood SLG-7 Manual De Instrucciones

If the audio is not output

If the audio is not output or the volume is very low while the PC is playing songs, adjust
the playback volume in the following procedure (which describes the example of
operation on Windows XP).
1
Select [Start] - [Setup] - [Control Panel].
2
Double-click on [Sound and Audio Devices Properties].
3
Select the [Audio] tab, open the [Predefined Devices] drop-down list
in the [Sound Playback] field and select [KENWOOD Wireless Audio].
4
Click on [Volume].
5
Uncheck the [Mute] checkbox and adjust the volume.
• The volume can also be adjusted by selecting [Start]
Devices Properties]
component connected to the Receiver. The simplest operation is to adjust the volume on
the audio component while the playback volume of the PC set at the maximum level.
• No audio is output from the PC speakers when the Transmitter is connected to the PC
through the USB cable.
Select [KENWOOD Wireless Audio].
–
[Volume] tab on the PC connected to the Transmitter or on the audio
17
– –
[Control Panel] [Sound and Audio
English