Loewe Active Glasses 3D Instrucciones De Manejo página 8

Start-up
Switching the 3D glasses on/off
In order to switch the glasses on, press the on button (C) at the top right of
the glasses briefly. This is confirmed by the LED display in the button lighting
up green for approx. 3 seconds.
In order to switch the 3D glasses off, depress the on button and hold for
at least 1.5 seconds. This confirmed by the LED display lighting up red for
approx. 3 seconds.
➠
If you are not using the glasses, please switch them off. This will
lengthen the service life of the integrated battery.
Use of the 3D glasses
Put the glasses on after switching them on.
If you normally wear glasses, you can wear the 3D glasses over your normal
glasses.
Sit as centrally as possible (up to an angle of max. 50° to the central axis)
and at a suitable distance (see the operating instructions for your TV set) in
front of your 3D ready Loewe TV set to experience the optimum spatial effects.
When 3D content is being shown, the 3D glasses receive an infrared signal
from the Loewe 3D TV set. The IR sensor is mounted centrally at the front of
the 3D glasses. For this reason, perfect functioning of the 3D glasses is only
possible when looking at the 3D TV set.
➠
If the 3D glasses do not receive an infrared signal from the 3D TV set
for a period of 30 seconds, they will switch off automatically.
- 8
C
2-6m
50°
press briefly:
LED: green = on
50°
>1.5 sec. pressing:
LED: red = off