Loewe Active Glasses 3D Instrucciones De Manejo página 7

Start-up
Thank you
for choosing a Loewe product. We are happy to welcome you as our customer.
Loewe offers you the highest technological standards, the best design and
optimum user-friendliness.
Charging the in-built battery
A battery is fitted in the glasses in the factory (not replaceable).
Before first use, the 3D glasses must be charged for about 2 h. A full charge
lasts for approx. 30 h of use.
Open the rubber cover (A) over the Micro-USB socket (B) on the right hand
side under the frame of the glasses.
Insert the (small) Micro-USB plug on the delivered USB cable in this socket.
Insert the (large) plug at the other end of the USB cable in the correspon-
ding USB socket (type A) on a unit which supplies peripheral equipment with
power, e.g. your Loewe TV set (not in standby mode) or a computer or USB
mains power unit (obtainable as an accessory from your specialist dealer).
During the charging process the display in the on button lights up (C)
continuous orange at the top right of the glasses frame. The display goes
out as soon as the charging process is finished. If the display flashes several
times (or if it does not light up at all after pushing the on button) repeat
the charging process.
As soon as the glasses are fully charged, remove the USB cable and replace
the rubber cover (A) to seal the Micro-USB socket (B), and protect it from
contamination.
C
A
B
Micro USB cable
7 -