Tabla de contenido
Hawa Concepta 35 pre-mounted
1 Table of contents
Contents
2
Product information
3
Safety instructions
4
Abbreviations, symbols
5
Overviews
6
Planning
7
Calculation
8
Pre-assembly
9
Assembly
10
Disassembling
5.1
Overview: Left-hand systems
5.2
Overview: Connector 55 mm (optional)
5.3
Overview: Connector 110 with and without plinth (optional)
5.4
Overview: Position numbers
6.1
Planning: Doors closing against base and top section with Connector 55
6.2
Planning: Doors closing against base and top section with Connector 110
7.1
Calculation: Door size/height ratio
7.2
Calculation: Plan view dimensions
7.3
Calculation: Hardware depth
7.4
Calculation: Drill hole positions
8.1
Pre-assembly: Processing the left side profiles
8.2
Pre-assembly: Processing the right side profiles
8.3
Pre-assembly: Scissor and bar installation, left-hand systems
8.4
Pre-assembly: Aligning the cabinet
8.5
Pre-assembly: Outside face
9.1
Assembly: Door; hinge pre-mounted to upright
9.2
Assembly: Door closing system
9.3
Assembly: Fine adjustment of upright inclination for door thickness between 19 - 22 mm
9.4
Assembly: Positioning the top stop dampener
9.5
Assembly: Positioning the bottom stop dampener
9.6
Assembly: Closing door with scissor bearing
9.7
Assembly: Adjusting the door height
9.8
Assembly: Door gap fine adjustment
9.9
Assembly: Front depth fine adjustment
9.10
Assembly: Fine adjustment pull-in speed
10.1
Disassembling: Door closing system for stationary external face
Page
8
8
14
15
16
17
18
19
20
21
22
23
24
26
27
28
32
33
34
36
39
41
42
43
44
45
46
47
48
7/52
Tabla de contenido
