Yakima BasketCase Manual Del Usuario página 2

aTTacH sNaParouNDs or MIGHTyMouNTs.
YaKIMa
roUnd BarS:
attach 2 snaparounds
onto each crossbar.
UnIverSal
MightyMount
#03590
FaCTorY or SQUare BarS reQUIre
The BaSKeT To SIT aBove The raCK.
This may be best for some round bars too,
depending on the crossbar spread.
MEasurE THE
DIsTaNcE bETWEEN
THE bars.
12" cRossbaR sPReaD:
Basket must be positioned
as in A.
MoRe than
12" cRossbaR sPReaD:
Try the orientations as in B or C.
(Round bars also see below).
rouND bars enable the basket
to sit below the crossbars.
Some accessories can be
attached to the crossbars
when BasketCase is
installed below the bars.
Choose the best orientation for
your crossbar spread.
1030172G - 2/9
SQUare BarS:
Loosen the tabs inside
the SnapArounds by
bending them repeatedly,
or remove the tabs with
scissors or pliers.
attach 2 snaparounds
onto each crossbar.
Follow the Universal MightyMount
instructions and refer to this
basketcase instruction for correct
installation.
A
B
C
D
E
FaCTorY BarS:
MightyMounts purchased
separately (refer to the YAKIMA
Fit List for correct MightyMounts
for your vehicle).
attach 2 MightyMounts
onto each crossbar,
according to
MightyMount
instructions.
Be sure the bolts pass
through the wire loops on the
bottom of the basket.
TIGHTEN
hex keys or bolts.
Be sure the bolts pass
through the wire loops on the
SIdeS of the basket.
snaparounds may face up or down, but the
bolt must alwaYs be at the top of the loop.
tighten heX keYs.