Safety Instructions; Components - Schneider Airsystems MAS-Dryer 3-10 Manual De Instrucciones Original

Voltage
Frequency
Electric protection, delayed-action
Protection class
Air volume flow according to DIN/ISO 7183
Electric power input
Pressure loss
Refrigerant
Operating pressure (refrigerant)
Filling quantity (refrigerant)
Air connection (plug nipple)
Overall dimensions:
Without holder: width x depth x height
With holder: width x depth x height
Weight
6

Safety instructions

WARNING
Risk of injury when operating with open
housing!
Close housing after maintenance!
• Be calm and focused and ensure proper
operation.
• Protect yourself and other persons, ani-
mals, property, and the environment by
taking the necessary protective measures
and being trained in use of the devices to
prevent harm to your health, property
damage, financial
harm or risk of accident.
• Repairs may be carried out only by
Schneider Druckluft GmbH or its approved
service partners.
• Intervention in the cooling circuit: only
qualified personnel from Schneider Druck-
luft GmbH permitted during the warranty
period, qualified experts as specified in
DIN EN 378 permitted after the warranty
expires.
• When a leak in the cooling circuit is re-
paired, a leak inspection should be carried
out within one month of the repair as spec-
ified in EC Regulation 842/2006.
• Handling HFCs: observe BGI 648 or appli-
cable national regulations!
loss, environmental
265 x 332 x 745
313 x 410 x 745
• Condensate disposal: observe Water Re-
sources Act (WRA) regulations or national
regulations!
• Prohibited: manipulation, inappropriate
use, temporary repairs, use of other ener-
gy sources, removal or use of damaged
safety equipment, operating a malfunc-
tioning or leaking system, use of non-orig-
inal spare parts, transporting, maintaining,
repairing, leaving a pressurised machine
unattended, smoking, naked flames, re-
moving stickers.
7

Components

01 Compressed air outlet
02 Compressed air inlet
03 ON/OFF switch
04 Housing
05 Service cover
06 Electrical connection
07 Plate heat exchanger
08 Hot gas bypass valve
09 Condensate discharger (float diverter)
10 Refrigerant compressor
11 Condensate outlet
12 Capillary pipe
13 Refrigerant filter dryer
14 Refrigerant condensator
GB
MAS-Dryer 3-10
230 V
50 Hz
10 A
IP 21
400 l/min
0,27 kW
0,4 bar
134a
17 bar
0,23 kg
NW 7,2
cm
cm
34 kg
7