Amica 10143.4TfDbJVQaS Manual De Uso página 69

OPERATION
Touch navigation sensor fields to change
the temperature. Temperature range and
default temperature are described in section
Menu \ Heating functions. Select the desired
temperature and touch
confirm. After touching the
thermometer symbol stops flashing. At the
same oven level symbol start flashing and it
is possible to modify it.
If no changes are made within 3 minutes,
the appliance exits to upper menu (User
Programmes) and stores settings last shown
on the display. Only changes confirmed by
touching are updated.
Touch navigation sensor fields to chan-
ge the oven level. Select the desired oven
level and touch
After touching the
symbol stops flashing. At the same
time symbol start flashing and it is possible
to modify it. If no changes are made within 3
minutes, the appliance exits to upper menu
(User Programmes) and stores settings last
shown on the display. Only changes confir-
med by touching
Touch navigation sensor fields to chan-
ge the cook time. Select the desired cook time
and touch sensor field to confirm. After
this, all selected and confirmed parameters
are stored by the appliance and the appliance
exits to upper menu (User Programmes).
When you re-enter P01 from the user pro-
grammes menu the appliance displays the
last saved settings. Editing the settings for
other programmes (P02-P10) is done in the
same way.
Touch or sensor field to change time
and temperature settings respectively during
operation of a user program.
. sensor field to
. sensor field,
sensor field to confirm.
sensor field, oven level
are updated.
User programme editing mode
To enter EDITING MODE select EDIT from
the menu using
fields and confirm selection by touching
Programme number will be displayed. Using
navigation sensor fields, select a user
programme such as PROGRAMME 1 and
touch , to confirm your selection. The ap-
pliance display will show the default settings
for all PROGRAM1 - PROGRAM 10 user
programmes: conventional cooking, tempe-
rature 180°C and cook time 00:30. Flashing
progress bar will show the successive steps
and inactive screens will be dimmed.
Use the
to select:
-heating function
- temperature
- baking level
cook
- cook time
Once cook time is confirmed, a keyboard will
be displayed to enter a custom programme
name. Touch OK to exit to user programmes
menu. User custom programme name will be
displayed under programme number.
Programme name may contain up to 25
characters.
For information on how to operate a user
programme, please refer to Operating user
programmes section.
69
navigation sensor
navigation touch sensors and
,