Wind The Watch / Setting The Moon Phase And Gmt - Ulysse Nardin Moonstruck Guía De Inicio

Setting the Moonstruck is easy, if a few steps are followed in the right order, to ensure
correct indications of both moon phase and tides.
The setting is done by means of the crown and the two pushers 1 and 2 on the left side of
the watch case.
A Crown screwed down. Always keep the crown in this position when
wearing or storing the watch.
B To wind the movement: unscrew and turn crown clockwise. If the watch
has stopped, approx. 30-40 turns are necessary to wind the movement
and give it enough power before wearing the watch.
C To set the calendar hand forward or backward: pull the crown into
position C.
Important : do not use quick corrector between 10:00 pm and 2:00 am;
doing so may result in damaging the calendar mechanism.
D To adjust the hour and minute hands: pull the crown into position D.
When turning the crown forward or backward, the hour and minute
hands as well as the current GMT (by means of the sun disc) are set.
Pusher 1 The hour hand is set forward, in one-hour increments. All other
indications will not be affected. Except the date.
Pusher 2 The hour hand is set backward, in one-hour increments. All other
indications will not be affected. Except the date.
WIND THE WATCH
Regardless on the time span during which the Moonstruck was stopped, the watch can
be quickly reset to show the proper time. If the time span was short, the easiest way to re-
set it is by turning the crown forward or backward in position D. Before advancing the time
in position D, wind the movement by turning the crown clockwise in position B to ensure
that the movement has some "energy" to keep the watch working.
SETTING OF MOON PHASE AND GMT
Turning the crown in position D forward or backward moves the hour and minute hands,
as well as all other indications. To adjust the watch by one day, the hour hand has to make
two complete turns (2 x 12 hours) while the sun disc rotates once (1 x 24 hours).
The first step to set the Moonstruck is the adjustment of the moon phase indication in
position D: Assuming it is May 21st and the last full moon was on May 18th (this can be
checked with a calendar or one of many online resources) an adjustment of three days
is required. Pull the crown to position D and turn it until the sun and moon symbols are
positioned directly opposite each other, and the moon window is completely filled with the
silver / golden color, which depicts the full moon. If turned too far one can easily turn the
crown backward, without harming the mechanism of the watch. Then count each further
complete revolution of the sun disc, which equals one day and turn the sun disc three
times to reach the desired date, May 21st. The moon window should show a small dark
blue zone.
5