Utilitech 7113-01-L Manual De Instrucciones página 7

NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS
5. Install a circular duct (not included) and secure it
with duct tape or clamps (neither included).
Finish ceiling work. Ceiling hole should be flush
with the edge of the flange. (DO NOT FLUSH
MOUNT TO JOIST. Flange should be flush with
ceiling board.) See dimensions for ceiling hole on
page 5. If joist is present, insert long wood screws
through flange and through ceiling to secure fan to
joist.
6. Attach plug connector to receptacle.
7. Install two (2) GU24, 13 watt bulbs (not included)
(F).
8. Pinch mounting springs on grille (B) and insert
into narrow rectangular slots inside the fan
housing next to the fan motor.
Turn on electricity at breaker box after finishing
installation.
5
6
7
8
7
Lowes.com