Camera Indicator - Panasonic BL-WV10 Guía De Configuración Inicial

Getting Started
3.9

Camera Indicator

Issue
After turning the power on,
the indicator is either solid
amber or flashing amber.
The indicator continues to
flash green.
The indicator continues to
flash red.
The indicator is red.
The indicator does not
turn green when using the
wireless LAN.
38
Causes and Solutions
The Ethernet cable is not correctly connected.
• Re-connect the Ethernet cable.
The router is not working properly.
• Check the router.
You are attempting to connect a wireless camera with
a wired/wireless switch, such as the BL-C30, in wired
mode but the wired/wireless switch is set to wireless,
or you are attempting to work in a wireless mode and
the wired/wireless switch is set to wired.
• Set the switch to the appropriate setting.
The Quick Setup settings are incomplete.
• Re-perform Quick Setup.
There is something wrong with a camera.
• Contact your dealer.
Privacy mode is turned on.
• Either press the PRIVACY button on the front
of the camera or turn off privacy mode (see
"Camera Setup for Local Cameras" on
page 93 of the Operating Instructions).
The wireless signal between the BL-WV10 and the
wireless camera is poor.
• Change the camera location, remove any
potential obstructions and try the connection
again.