Maxon TE-33/GPTLR Manual De Instrucciones página 3

LIFT CORPORATION
1. Lower the platform to a comfortable
work height (FIG. 3-1). Then, use jack
under the lift frame to support the Lift-
gate (FIG. 3-1). Refer to Operation
Manual for detailed operating instruc-
tions.
WARNING
!
To prevent personal injury
and equipment damage, make
sure power is disconnected
from Liftgate while installing
hydraulic parts.
2. Disconnect power to the pump by
disconnecting negative (-) and
positive (+) cables from battery (FIG.
3-2). Reinstall nuts on negative (-)
and positive (+) battery terminals.
3. Unbolt and remove pump cover
(FIG. 3-3).
© MAXON Lift Corp. 2018
Sht. 3 of 48 DSG#
JACK
SUPPORTING LIFT FRAME WITH JACK
NEGATIVE (-)
BATTERY CABLE
DISCONNECTING BATTERY POWER
UNBOLTING PUMP COVER
M-13-05
Date: 07/30/18
LIFT FRAME
FIG. 3-1
POSITIVE (+)
NUT BATTERY CABLE
POSITIVE (+)
BATTERY POST
NEGATIVE (-)
BATTERY POST
FIG. 3-2
FIG. 3-3