Operating Conditions; Technical Indices And Requirements - Ferroli MD-CCM09 Manual De Instalación Y Del Usuario

Code
PF Other protection measures
PE Reserved
PD Reserved
PC Reserved
PB Reserved
PA Reserved
P9
Reserved
P8 Excess flow of compressor
P7 Over-voltage or under-voltage protection
P6 Low-voltage protection of air exhaust
P5 High-voltage protection of air exhaust
P4 Temperature protection of exhaust pipe
P3 Temperature protection of compressor
P2 High temperature protection of condenser
P1 Cold air-proof or defrosting-proof protection
P0 Temperature protection of evaporator

11. TECHNICAL INDICES AND REQUIREMENTS

1. EMC comply with the CE certification requirements.
EN
Content
12. BASIC CONDITIONS OF OPERATING THE
WEEKLY CENTRALIZED CONTROLLER
12.1 Applicable range of supply voltage:
Power
Supply

12.2 Operating Conditions:

Environment temperature: -15°C~+43°C(+5°F~+109°F).
Environment Relative Humidity: RH40%~RH90%.
12.3 Requirements of UL60730-1:
(only for model UL-CCM09(A)/E)
■
Degrees of Pollution: Pollution Degree 2.
■
Automatic Action: Type 1 Action.
■
Rated impulse voctage: 1500V.
■
The ball pressure test temperature of the plastic
enclosurer: 125°C(257°F).
■
Controls shall be constructed so as to be installable in
accordance with the National Electrical Code, NFPA 70.
Cod. 3QE46680 - Rev. 00 - 01/2021
Single phase,
50Hz, 198V-242V
Owner's & Installation manual
31