Ferroli MD-CCM09 Manual De Instalación Y Del Usuario página 45

Table.7-2
KEY NAME USAGE
When querying the indoor unit, press the "Reduce"button to query more parameter of the indoor unit. In setting the
indoor unit, it is for modifying the setting temperature. In setting the weekly timer, it is for modifying the time of startup
and shutdown.
In setting the indoor unit, it is used for setting the running mode of the indoor unit which includes Automation, Cool, Heat,
Fan Only, Dry and Off. You can select among them.
In setting the indoor unit, it is for setting the wind speed of the indoor unit which includes high speed, middle speed, low
speed and automatic speed. You can select one among them.
In setting the indoor unit, it is for setting the swing-function of the indoor unit. The running mode is selected
between"swing-on"and" swing-off".
When setting, press the "Lock" button to lock the remote controller of all or single indoor unit. Press the "Query" button
and hold under the main page, then repress the" Lock" button again to lock the keyboard of the central controller; press
the "Mode" button and then repress the "Lock" button to lock the running mode.
The central controller re-scans the indoor unit in the network as recharging after power off.
Under the main page, press the "Program" button to set the weekly timer of "single indoor unit" or "all indoor units". Press
the "Query" button and hold, and then press the "Program" button to query the weekly timer parameters of the indoor
unit.
Owner's & Installation manual
EN
11
Cod. 3QE46680 - Rev. 00 - 01/2021