The Operating Flow Description Of The Weekly-Timer Central Controller - Ferroli MD-CCM09 Manual De Instalación Y Del Usuario

8. THE OPERATING FLOW DESCRIPTION OF THE WEEKLY-TIMER CENTRAL CONTROLLER

8.1 How to set the running status of the air conditioner?
Under the main interface
1. Press to enter the setting status interface of single air
Set
conditioner. Press the button repeatedly to select Single and All
alternately, display "Set".
If you select Single, press
2. Selecting "All" indicates to set the running status of all air
conditioners, and "All" is displayed. Selecting "Single"displays the
address of the air conditioner; for example, if the air conditioner
whose address is 12 is selected, "12 # " is displayed.
3. Press to select running mode: automatic, cooling, heating, air
supply, dehumidification, or shutdown. If you select "Shutdown" mode,
press to send shutdown command, finishing shutdown setting.
EN
to select one.
Cod. 3QE46680 - Rev. 00 - 01/2021
4. If you select the cooling or heating mode, press
to adjust the temperature (the scope is within 17-30 degree).
No temperature adjustment for other modes.
5. Press Fan to regulate wind speed, which can be selected among
automatic speed, low speed, middle speed and high speed.
6. Press to open or close swing.
Swing
7. Press to save the above setting and send to the
Confirm
corresponding air conditioner, finally finish setting.
Add Reduce
Fig.8-1
Owner's & Installation manual
17