Clock Setting; Setting The Clock Automatically - Grundig Ocean Boy 510 Manual De Instrucciones

RADIO OPERATION
Programme Type
• Tune to an RDS station.
– The ' ' symbol appears.
• Press the PTY button once.
– The display shows the programme type of the
current programme.
– If the station does not broadcast the
programme type, the display briefly indicates
'NO PTY'.
• By pressing the PTY button you can call up the
programme types one after another.
• Then press + or – once. The unit starts scan-
ning the stations to find a station broadcasting
the required programme type. As soon as
such a station is found it is tuned to.
– During the search PTY flashes on the display.
• The search can be stopped by pressing + or –
once.
Radiotext display
• Tune to an RDS station.
– The ' ' symbol appears.
• Press the TEXT button once.
– If the tuned station broadcasts radiotext, the
text information appears as 'running' text on
the display.
– If the station does not broadcast radiotext or if
the information is not yet received, the display
briefly indicates 'NO TEXT.
• To disable this function, press TEXT again.
• Press and hold the TEXT button to display the
Radio Text scrolling quickly.

CLOCK SETTING

Setting the clock automatically

The time and the day of the week can be set
automatically when receiving an RDS station
which transmits the clock time (CT) information.
Please note that not every RDS station transmits
the clock time information.
This information (when available) is transmitted
by the RDS radio stations once every minute.
The clock is set within one or two minutes, if the
RDS station has enough signal strength.
• Switch on the radio with the ON/OFF button.
• Search for an RDS station.
– The Auto-Time indicator flashes, indicating
that the set is waiting for the time signal.
– The indicator stops flashing when the time
and day of the week is set. The quartz clock
starts to run with the received time.
• If the clock is not set after 3-4 minutes, try
another RDS station.
The clock time and day of the week are updated
automatically each time the radio is switched on
and when you tune to an RDS station, as long as
the Auto-Time function is enabled.
• To enable and disable this function, the radio
must be switched on.
• To disable the Auto-Time function, press the
TIME SET button briefly.
• To enable the function again, press the TIME
SET button once again.
GB
17