Mathmos SENSORY LIGHTS SPACE Instrucciones página 2

Please read these instructions thoroughly before using the projector
and keep them for future reference.
Bitte lesen Sie die Gebrauchsanweisung vor Inbetriebnahme des
Projektors genau durch und bewahren Sie diese sorgfältig auf.
Veuillez lire attentivement ces instructions avant d'utiliser le projecteur
et les conserver pour une consultation ultérieure.
Si prega di leggere attentamente le presenti istruzioni prima di usare il
proiettore e di conservarle per un riferimento futuro.
Läs dessa instruktioner noga innan du använder projektorn och spara
instruktionerna för framtida användning.
Læs venligst denne vejledning omhyggeligt før brug af projektoren, og
gem den til senere opslag.
Lees alle instructies zorgvuldig door voordat u de projector gebruikt en
bewaar ze voor toekomstig gebruik.
Le rogamos lea las presentes instrucciones en su totalidad antes de
usar el proyector y las guarde para un uso futuro.
ENGLISH:
INSTRUCTIONS
IMPORTANT - SAFETY
• This projector is not a toy and should be placed out of reach of children under
8 years old.
• Children aged 8 years and above may use the projector, following
instructions on safe use.
• People with reduced physical, sensory or mental capabilities should be
supervised, have the projector placed out of reach, or given instruction on
safe use depending on their capabilities.
• The ventilation openings on the projector and in the transformer must not to
be blocked during operation of the projector.
• Cleaning or repairs should always be undertaken by an adult without reduced
capabilities.
• If the supply cord is damaged, do not use the projector and contact Mathmos.
• Only use a lamp with the following specification: 30⁰ 3W 12V 4LED 35mm
DIAMETER, GU4/MR11, 4000K, available from Mathmos, or Sensory Lights
websites.
• Always disconnect the projector from the power supply and allow it to cool
before changing the lamp or parts of the optical system.
• Never look directly into the focusing lens when the lamp is switched on.
• Do not leave lava lamp wheels exposed to direct sunlight; they will fade.
• Use the projector only when fitted to its base and placed on a level surface.
• Unplug the transformer from the mains when not in continuous use.
The Space Projector is a CLASS II Electrical Product (12V SELV) connected
to a class II power supply. It has passed the relevant safety standards and
carries the statutory guarantee of the country of purchase.
Slide carrier slot
Focusing lens
Wheel slot
Wheel is central in Projector
SETUP
1. Unpack projector and place it upright on a stable surface; not carpet or other
soft surfaces.
2. Place the transformer in a position where air can circulate around it.
3. Unpack the wheel and put it into the wheel slot with the "M" logo facing the
focusing lens. A light click will be felt when the wheel is central and correctly
positioned in the projector.
4. Plug the projector in at the socket and switch on.
2
Wheel
Slide carrier
Transformer
1