Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
Meters
For dimensions see drawing at page 16.
Using the template provided, cut out openings in
the instrument panel or bulkhead. Attach each
meter using the 4 threaded rods and nuts provid-
ed. Ensure that the seal sits correctly between the
meters and the panel or bulkhead.
Wind sensor
For dimensions see drawing at page 16.
The wind sensor should be fitted in a position unshielded from the wind and away from
any possible source of eddies which could give misleading readings. On a sailing boat
the mast head is the best position. If this is not practical, or on a vessel without a mast,
the unit should be located as high as possible in a position fully exposed to the wind.
Mount the base of the wind sensor to a horizontal
surface (e.g. horizontal with the ship in his normal
position).
Feed the cable of the wind sensor through the
base.
Select for the wind sensor a position at least 1
metre away from a VHF antenna.
4
10.0308
Wind speed/ wind direction indicator WSD833
Tabla de contenido
