Emptying The Collection Receptacle/Replacing The Filter Insert Gibe (Figure 6); Switching On And Off - Fein GIBE5V6 Manual De Instrucciones

GIB_GIBE (US).book Seite 9 Mittwoch, 18. März 2009 9:50 09
GIB/GIBE
9. Emptying the collection receptacle/Replacing the filter insert
GIBE (Figure 6).

9.1 Switching ON and OFF.

Loosen the hose clamp of the rear extrac-
tion hose and pull off the extraction hose
from the connection sleeve.
Loosen both star-knob bolts and completely
pull out the collection receptacle.
Loosen the six screws until the frame and
the filter inserts can be pulled out to the
rear.
Clean the filter insert with compressed air
and empty the collection receptacle.
Place the cleaned filter inserts into the frame
with the correct side facing upward.
Reassemble all components in reverse
order.
Frame
Filter insert (fine filter)
Locking
screws
Collection receptacle
Star-knob bolts for collection receptacle
Filter insert (coarse filter)
Connection sleeve
en
Fig. 6
9