Care and Cleaning
Electrical Shock Hazard.
w WARNING
Do not immerse cord, plug, or coffee maker in any liquid.
NOTE: All coffee makers should be cleaned at least once a month
(once a week for areas with hard water).
Plug into outlet.
1.
Pour 1/2 cup (118 ml) of plain white vinegar
2.
and 1/2 cup (118 ml) of cold water into
reservoir.
Place a cup underneath to catch the water/
3.
vinegar solution.
Press the BREW button once. After 30
4.
seconds, unplug unit and allow vinegar to
clean. After 30 minutes, plug in unit and allow
it to finish the brew cycle. When brew cycle is finished, wait for
unit to cool. Empty cup and rinse. Repeat steps 1–4 with
1 cup (237 ml) of cold tap water.
Unplug unit.
5.
Routine Cleaning of the Needle: The needle is
6.
located in the lid of the coffee maker. Bend a
small paper clip as shown; insert the tip of the
paper clip through the hole/eye of the needle
(Figure A) and up into the needle (Figure B)
to ensure grounds have been removed. Brew
2 or 3 times with cold water to make sure
grounds have been removed from the piercing
needle.
9
A
B