Bosch GSC 160 Manual De Instrucciones página 6

EURO • Printed in Germany • BA 3 609 929 787 • GSC 160 • GB • OSW 02/00
GSC 160 (-787) - Buch Seite 7 Mittwoch, 23. Februar 2000 2:22 14
Product Specification
Sheet Metal Shears
Part number
Rated power
Output power
Stroke rate at no load
Full-load stroke rate
Cutting thicknesses
2
Steel sheet (400 N/mm )
2
Steel sheet (600 N/mm )
Aluminium sheet (250 N/mm
2
INOX sheet (800 N/mm )
Weight (without
optional extras) approx.
Safety class
Noise/Vibration Information
Measured values determined according to
EN 50 144.
The A-weighted noise levels of the machine are
typically: sound pressure level: 85 dB (A); sound
power level: 98 dB (A).
Wear ear protection!
The weighted acceleration is typically 3 m/s
Machine Elements
1 On/Off switch
2 Chip deflector
3 Stroke rod
4 Upper cutter
5 Lower cutter
6 Set screw lower blade
7 Attachment screw (lower cutter)
Not all of the accessories illustrated or described are
included as standard delivery.
Intended Use
The machine is intended for cutting sheet metals
without loss due to metal chips. It is suited for
curved and straight cutting.
GB
GSC 160
0 601 500 4..
500 W
270 W
5 000 RPM
3 500 RPM
max. 1.6 mm
max. 1.0 mm
2
) max. 2.2 mm
max. 0.7 mm
1.8 kg
/ II
2
.
For Your Safety
Working safely with this machine
is possible only when the operat-
ing and safety information are
read completely and the instruc-
tions contained
strictly followed. In addition, the
general safety instructions in the
enclosed booklet must be fol-
lowed. Before using for the first
time, ask for a practical demon-
stration.
If the mains cable is damaged or cut
through while working, do not touch
the cable but immediately pull the
mains plug. Never use the machine
with a damaged cable.
Wear protective gloves and sturdy
shoes.
Wear protective glasses and ear
protection.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
Always direct the cable to the rear away from
the machine.
Always switch off the machine and allow to
come to a stop before placing it down.
Insert the mains plug only when the machine is
switched off.
The machine must not be used without the chip
deflector 2.
When cutting, never place the hand in front of
the cutters.
Apply the machine to the workpiece only when
switched on.
Never allow children to use the machine.
Bosch can assure flawless functioning of the
machine only when original accessories are
used.
therein are
7