unotec 21.0049.01.00 Manual De Instrucciones página 3

usinG piTalY ii
A. General Functi ons
On: Press the Play / Pause butt on for 3 seconds. The blue LED fl ashes
slowly and beep sounds.
Pairing Mode: With the device off , press the Play / Pause butt on for
six seconds. The LED fl ashes alternati ng between red and blue and
two beeps will be heard.
Linking the device: When in pairing mode (red and blue fl ashing
LEDs), enable Bluetooth phone and proceed to link them (details in
paragraph b).
Play / Pause: Press the Play / Pause butt on to play or pause playback.
Volume: To increase or decrease the volume, press the corresponding
key (+, -).
Previous / Next: To move to the next track or go to previous, press the
corresponding key (<>).
Off : Press the Play / Pause butt on for 3 seconds. The device will turn
off and beep sounds.
Low batt ery alarm: The LED fl ashes quickly.
Charging: Plug the cable / charger to the microUSB port. The red LED
will light.
Answering a call: Press the Play / Pause butt on for one second when
we are being called.
Ending a call: Press the Play / Pause butt on for one second to end
the call.
Transfer a call: Press the "-" butt on for two seconds to transfer the call
between the phone and the device.
Rejecti ng a call: Press the Play / Pause butt on for two seconds to
reject a call.
B. Linking the device to your phone
To use the Bluetooth stereo, you must fi rst pair it with your phone
device. Once paired your phone will recognize it automati cally, as long
as, is at the proper distance (10 meters at best, although it may vary
depending on the environment).
• To bind, acti vate the bluetooth functi on of your mobile phone.
• Turn on Bluetooth headset pairing mode (remember, being turned
off , press the Play / Pause butt on for 6 seconds unti l the red and blue
fl ashing LEDs).
• within the Bluetooth menu, search for devices on your phone (see
your phone manual if necessary).
english 3